Electric
Press Brakes
Precision Forming. Cleaner, Faster, More Efficient
Precision Forming. Efficient Operation.
When your shop demands tight tolerances, faster cycle times, and lower operating costs, Wysong electric press brakes deliver. Our servo electric press brake machines use advanced servo-driven technology to achieve exceptional bend accuracy with no hydraulic fluid, no constant pump noise, and significantly less energy consumption. As a trusted electric press brake manufacturer, Wysong offers fully electric solutions from 25 to 220 tons — purpose-built for modern fabricators who can’t afford to compromise on quality or efficiency.
Wysong Electric Press Brakes are built for modern fabricators who demand accuracy, speed, and energy efficiency. Designed with advanced servo-electric technology, these machines provide consistent bending performance while reducing operational costs and environmental impact.
What Is an Electric Press Brake Machine?
An electric press brake machine uses servo motors — rather than hydraulic fluid — to drive the ram through a ball screw or belt-drive mechanism, converting rotary motor motion into the precise linear force needed to bend sheet metal. Because the motors only draw power during the actual bending stroke, electric press brakes consume significantly less energy than hydraulic systems and require no hydraulic oil, filters, or fluid maintenance.
When configured with CNC controls, a servo electric press brake adds programmable back gauges, multi-axis positioning, and repeatable bend sequencing — delivering consistent, high-accuracy results across high-mix production runs with minimal operator input. The result is faster throughput, tighter bend tolerances, and a cleaner, quieter shop floor.
Why Choose a Fully Electric Press Brake?
Fully electric press brakes represent the modern standard for precision metal forming — and the advantages over traditional hydraulic systems are significant. From energy savings to maintenance reduction to superior bend accuracy, the case for going electric is clear.
Key Benefits:
- Up to 50% energy savings — Servo motors draw power only during the bending stroke, not continuously like hydraulic pumps — reducing energy consumption dramatically.
- Superior bend accuracy — Direct positional servo control achieves tighter tolerances and better repeatability than hydraulic systems, reducing scrap and rework.
- Faster cycle times — Electric press brakes deliver rapid ram acceleration and deceleration, increasing throughput — especially on high-mix, short-run production.
- Zero hydraulic fluid — No oil means no fluid changes, no leak risk, no contamination concerns, and a cleaner, safer work environment.
- Quieter operation — Without hydraulic pumps running continuously, electric CNC press brakes operate at significantly lower noise levels — improving shop conditions.
- Lower maintenance requirements — Fewer moving parts and no hydraulic system components mean less scheduled downtime and lower long-term service costs.
Fully Electric vs. Hybrid: Which Is Right for You?
Fully electric press brakes are the right choice for shops prioritizing precision, energy efficiency, and low maintenance on light-to-mid-gauge sheet metal work. With no hydraulic components, they’re clean, quiet, and ideal for high-mix production environments where repeatability and fast changeovers matter most.
Hybrid press brakes combine servo-electric controls with a hydraulic system — delivering the precision and energy savings of electric technology alongside the higher tonnage capacity of hydraulics. They’re a strong option for shops that need more force than a fully electric machine provides but still want the efficiency gains of servo control.
Not sure which technology fits your operation? Our team will help you evaluate your tonnage requirements, material types, and production volume to find the right match.
MS Series — 25–110 Ton Servo Electric Press Brakes
Wysong MS Series servo-electric press brakes represent the future of precision forming—combining unmatched energy efficiency, lightning-fast cycle times, and exceptional bend accuracy in a clean, quiet, low-maintenance package.
From 25 to 110 tons, bending lengths from 3 ft – 10 ft
Heavy-Duty Welded Steel Frame: Ensures structural rigidity, reduces deflection, and increases long-term durability.
Operator-Friendly Controls: Simple, intuitive interface for fast setup and efficient operation—even for new users.
Fast, Accurate Backgauge: Servo driven for precise positioning and repeatability in production.
Compact Footprint: Designed for smaller shops and precision work cells where floor space is limited without sacrificing forming capability.
ME Series — 25–110 Ton Servo Electric Press Brakes
Wysong ME Series belt-driven servo-electric press brakes offer a clean, efficient, and highly accurate bending solution for modern fabrication environments. Built for speed, precision, and energy efficiency, the ME Series uses advanced belt-driven servo motor technology to deliver smooth, repeatable motion without the drawbacks of traditional hydraulic systems.
From 110 to 220 tons, bending lengths from 10 ft – 13 ft
Heavy-Duty Welded Steel Frame: Ensures structural rigidity, reduces deflection, and increases long-term durability.
Operator-Friendly Controls: Simple, intuitive interface for fast setup and efficient operation—even for new users.
Fast, Accurate Backgauge: Servo driven for precise positioning and repeatability in production.
Belt-Driven Servo Technology: Advanced belt-drive mechanism delivers smooth, high-speed ram motion with consistent accuracy across the full bending stroke.
Built for Precision-Driven Industries
Wysong electric press brake machines are trusted by fabricators across sectors where precision, repeatability, and clean operation are non-negotiable. From complex aerospace components to high-volume electronics enclosures, our servo electric press brakes handle the work that demands accuracy above all else.
- Custom metal fabrication
- Precision sheet metal parts
- Electronics and electrical enclosures
- Aerospace and defense components
- Automotive and appliance manufacturing
- HVAC and ductwork
- Medical device manufacturing
If your work demands tight tolerances and consistent results — a Wysong electric press brake is built for it.
About Us
Quality First
Wysong equipment is well known throughout North America for being among the most durable machines on the market. Whether your machine is produced at our 110,000 sf factory in North Carolina or by one of our carefully selected partners, we promise to provide proven fabrication equipment with a focus on quality and customer service.
We spend an average of 40 hours of quality assurance on every machine we ship to ensure that it meets our demanding standards. This commitment to quality is why over 20,000 Wysong press brakes continue operating in shops worldwide.
Machines Backed By People
When you partner with Wysong, you get more than just a great machine. Our team has hundreds of years of combined experience with fabrication equipment, and we use this experience daily to help our customers.
We understand that every shop is different, which is why we take the time to learn your processes, challenges, and goals before recommending solutions.
Whether you need complementary phone support, field service, technical training, or new equipment for your shop, we’re here to help.
Machines Backed By People
When you partner with Wysong, you get more than just a great machine. Our team has hundreds of years of combined experience with fabrication equipment, and we use this experience daily to help our customers.
We understand that every shop is different, which is why we take the time to learn your processes, challenges, and goals before recommending solutions.
Whether you need complementary phone support, field service, technical training, or new equipment for your shop, we’re here to help.
Electric Press Brake FAQs
An electric press brake machine uses servo motors and a ball screw or belt-drive mechanism to bend and form sheet metal — replacing the hydraulic fluid system used in traditional press brakes. The result is a cleaner, quieter, more energy-efficient machine with superior bend accuracy and lower long-term maintenance requirements.
A servo electric press brake is an electric press brake that uses servo motors to drive the ram with precise positional control. Unlike hydraulic systems, servo motors only draw power during the active bending stroke — delivering faster cycle times, higher accuracy, and significant energy savings compared to continuously running hydraulic pumps.
Wysong electric press brakes can reduce energy consumption by up to 50% compared to traditional hydraulic systems. Because servo motors only run when the machine is actively bending, there is no continuous power draw from a running hydraulic pump.
A fully electric press brake uses servo motors exclusively — with no hydraulic system — delivering maximum energy efficiency, low maintenance, and clean operation. A hybrid press brake combines servo-electric controls with a hydraulic cylinder, offering the precision and efficiency of electric technology alongside higher tonnage capacity for heavier applications.
Wysong electric press brakes work with mild steel, stainless steel, aluminum, copper, brass, and other sheet metals. They are best suited for light-to-mid-gauge material where precision and repeatability are the priority.
No. Wysong's fully electric press brake machines use no hydraulic fluid — eliminating the need for oil changes, fluid checks, and leak prevention. This also makes them a cleaner, more environmentally responsible choice for your shop floor.
Ready to Upgrade Your Bending Capabilities With An Electric Press?
Our team has hundreds of years of combined fabrication equipment experience. Tell us what you’re bending — we’ll recommend the right servo electric press brake machine for your precision, production, and tonnage requirements.
Not sure if an electric press break is right for you? Explore our hydraulic press brake and hybrid press brake systems, or consider a custom press brake build instead.
- (800) 299-7664
"*" indicates required fields
