Tandem Press Brakes
When your shop takes on parts that exceed the capacity of any single press brake, such as long structural panels, aerospace skins, shipbuilding components, and wind tower sections, a tandem press brake system is the answer. Wysong tandem press brakes combine two synchronized hydraulic machines into one unified bending system, unlocking extended bending lengths, combined tonnage, and the flexibility to run each machine independently when you don’t need both. Whether you’re forming a large structural beam or a complex architectural panel, a Wysong CNC tandem press brake delivers the precision and power to get it done.
What Is a Tandem Press Brake?
A tandem press brake is a synchronized press brake system consisting of two press brake machines positioned side by side and coordinated through a shared CNC control system. Rather than relying on a single large press brake, a tandem hydraulic press brake achieves the same result by linking two proven machines in perfect alignment.
Both rams move simultaneously under a master-slave synchronization system, with linear encoders monitoring position in real time. If either side deviates, the controller instantly compensates, delivering consistent, accurate bends across the full length of the workpiece.
The result: a press brake for bending long parts that would otherwise be impossible to form in a single operation.
Why Choose a Tandem Configuration?
Tandem press brakes aren’t just for massive operations. They’re the right choice for any shop that regularly faces bending lengths beyond what a standard press brake can handle, or needs the flexibility to tackle both long-run and short-run work with a single equipment investment.
Key Benefits:
- Extended bending capacity: Combine two machines to achieve bending lengths beyond what any single press brake can handle. Tackle structural beams, trailer frames, curtain wall panels, and other large components without repositioning or welding shorter sections together.
- Combined tonnage for heavy-duty work: A heavy-duty tandem press brake multiplies available forming force, enabling you to bend thick plate and hard materials that would strain a single machine.
- Dual-mode operation: Run in synchronized tandem for long workpieces, or split into two independent machines for standard-length jobs. Maximize floor utilization around the clock.
- Precision synchronization: Advanced CNC synchronization maintains alignment throughout every stroke, ensuring consistent bend angles across the entire length of even the most demanding workpieces.
- Lower installation cost than a single extra-long machine: Two standard-frame press brakes are easier and less expensive to transport, install, and service than a purpose-built long-bed machine of equivalent capacity.
- Built-in redundancy: If one unit is down for tooling changes or scheduled maintenance, the other keeps producing.
Who Uses Tandem Press Brakes?
A dual press brake configuration is the standard solution in industries where large, long, or heavy components are the norm.
- Aerospace & Defense: Wing spars, fuselage skins, and structural frames demand long bends held to extremely tight tolerances. Tandem CNC press brakes provide the accuracy and repeatability these applications require.
- Structural Steel & Construction: Steel beams, curtain wall sections, bridge components, and light poles routinely exceed the capacity of single press brakes. A synchronized press brake system handles these in one pass.
- Shipbuilding & Marine: Hull plates, deck structures, and bulkhead panels are among the longest, heaviest sheet metal components in any industry. Tandem configurations make them manageable.
- Wind & Renewable Energy: Tower shells, turbine housings, and nacelle components require consistent bends over long spans in thick materials: exactly what a tandem hydraulic press brake is designed for.
- Heavy Equipment & Transportation: Truck frames, trailer rails, railcar panels, and agricultural equipment structures often far exceed single-machine capacity. Tandem setups eliminate the need to section and weld these parts.
- Architectural Metalwork: Large facade panels, decorative beams, and custom structural shapes demand both length capacity and surface quality. Tandem press brakes deliver both.
Wysong Tandem Press Brake Configurations
Wysong tandem systems are built on our proven MB, MC, and MD Series hydraulic press brakes; machines trusted in more than 20,000 installations worldwide. Because our tandem configurations use the same field-proven platforms as our standard hydraulic lineup, you get identical build quality, the same component suppliers, and the same service and support infrastructure you’d expect from any Wysong machine.
Tandem configurations are available in our hydraulic press brake lines:
MB Series Tandem: 44–350 Ton Per Machine, Up to 30 ft Per Machine. MB Series Press Brakes deliver dependable bending power with servo-driven back gauge control, HAWE hydraulics, and Delem, ESA, or PC control options. Available in a wide range of tonnages and lengths.
MC Series Tandem: 110–550 Ton Per Machine, Up to 30 ft Per Machine. The MC Series features a dual-cylinder hydraulic system and rigid steel frame engineered for high tonnage performance and consistent accuracy across long bed lengths. Purpose-built for demanding production environments. Contact us for tandem configuration details.
MD Series Tandem: 150–1,100 Ton Per Machine, Up to 30 ft Per Machine. For shops bending thick structural plate or large components, the MD Series is Wysong’s most capable and customizable hydraulic platform. Contact us for tandem configuration details.
Why Wysong
For decades, fabricators across North America have turned to Wysong for one reason: these machines last. Every press brake we ship, whether built at our 110,000 sf facility in North Carolina or sourced through a carefully vetted manufacturing partner, is held to the same demanding standard. That means an average of 40 hours of quality assurance before any machine leaves our floor. The result speaks for itself: more than 20,000 Wysong press brakes are still running in shops worldwide.
Quality First
Wysong equipment is well known throughout North America for being among the most durable machines on the market. Whether your machine is produced at our 110,000 sf factory in North Carolina or by one of our carefully selected partners, we promise to provide proven fabrication equipment with a focus on quality and customer service.
We spend an average of 40 hours of quality assurance on every machine we ship to ensure that it meets our demanding standards. This commitment to quality is why over 20,000 Wysong press brakes continue operating in shops worldwide.
Machines Backed By People
Our team has hundreds of years of combined experience with fabrication equipment, and we use that experience daily to help our customers.
We understand that every shop is different, which is why we take the time to learn your processes, challenges, and goals before recommending solutions, especially for specialized configurations like tandem press brakes, where getting the setup right is critical.
Whether you need phone support, field service, technical training, or help specifying the right tandem configuration for your application, we’re here for you.
Partner With Wysong for the Best Tandem Press Brake Configuration
Tell us what you’re bending: the length, material, and tonnage requirements, and we’ll recommend the right tandem press brake solution for your operation.
- (800) 299-7664
"*" indicates required fields